EasyWeed Electric Heat Transfer Vinyl


Pressing Instructions

  1. Load the heat transfer vinyl in your vinyl cutter with the back side face up. Cut design in REVERSE.
  2. Weed out the excess material using a vinyl weeding tool
  3. Press your design on the garment at 305F for 15 seconds with medium pressure. 
  4. You may peel EasyWeed Electric HOT or COLD.

Washing Instructions

  • Machine wash inside-out WARM with mild detergent
  • Dry at normal setting
  • Do not use chlorine bleach
  • Do not dry clean
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request