Shot Glasses

Pressing instructions for Glass 1.5 oz and 3 oz shot glasses: 
SKU 
74686 | 74687

1.5 oz shot glass - PDF Template for Adobe Photoshop
1.5 oz shot glass - EPS Template for Corel Draw | Adobe Illustrator

3 oz shot glass - PDF Template for Adobe Photoshop
3 oz shot glass - EPS Template for Corel Draw | Adobe Illustrator

Sublimation with Shot Glass Wrap: 

Note: Baking times may vary depending on the individual oven. 

  1. Print image in reverse and tape onto shot glass.
  2. Wrap silicone wrap around shot glass surface and clasp at handle.
  3. Heat the oven to 400F and bake approximately 12-15 minutes in the oven
  4. Take out the shot glass and remove paper immediately to end the sublimation process. 

Compatible wraps: 

Adjustable Silicone Sublimation Wrap for 1.5oz. Shotglass - SKU 74685
Fitted Silicone Sublimation Wrap for 1.5oz. Shotglass - SKU 13015

Pressing Instructions for Ceramic 1.5 oz shot glass:
SKU 
74684

 

PDF Template for Adobe Photoshop
EPS Template for Corel Draw | Adobe Illustrator

Mug Master Pro Heat Press Instructions:

Idle Temperature: 380F°
Pressing Temperature: 385F°
Time: 180 seconds

Note: You must use the Shot Glass Heating Element!

  1. Tape the sublimation paper with image printed in reverse to the shot glass with thermal tape.
  2. When the heat press reaches the idle temperature of 380 F°, you will hear a beeping sound indicating that the machine is ready. Place the shot glass in the element and close it by pulling the handle towards you. 
  3. Press the green, round button to begin the pressing cycle.Temperatures may drop which is normal. Once the temperature reaches 385 F° the timer will begin counting down. 
  4. Once the timer reaches 0, take out the shot glass from the press and remove the transfer paper immediately. Allow the mug to cool completely before use.

Sublimation with Shot Glass Wrap:

  • Attach reversed printed image to shot glass with thermal tape
  • Wrap silicone wrap around shot glass surface and clasp at handle
  • Place in oven preheated to 400F for approximately 10-13 minutes (test to determine best timing!)
  • Afterwards, remove wrap and transfer immediately to stop the sublimation process. 

Compatible wraps: 

Adjustable Silicone Sublimation Wrap for 1.5oz. Shotglass - SKU 74685
Fitted Silicone Sublimation Wrap for 1.5oz. Shotglass - SKU 13015 

Share:
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request