EasyWeed Adhesive Heat Transfer Material


Compatible Fabrics:

  • 100% polyester
  • 100% cotton
  • Cotton/poly blends

Washing/Care Instructions:

  • Turn garment inside out
  • Machine wash cold/mild detergent, delicate cycle
  • Recommend hang-dry only

Compatible Transfer Foils:

  • Heat Transfer Metallic Foil

Pressing Instructions

Adhesive Application:

  • Cut design in reverse with standard blade and settings - weed excess material
  • Prepare heat press to 300F and prepress garment for approximately 2-3 seconds
  • Lay liner and adhesive transfer face down on garment and align as desired
  • Place cover sheet over design and press for 3-5 seconds using light pressure
  • Peel liner immediately while transfer is HOT

Foil application:

  • Cut foil sheet slightly larger than total design area
  • Place foil (colored/foil side face up) and place cover sheet over design
  • Press at 300F with firm pressure (6-7 bar) for approximately 8-10 seconds
  • Remove foil liner once garment and transfer have completely cooled
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request