ColorPrint Soft Printable Heat Transfer Vinyl for Light Garments

SKU CPS

Core size

  • 3"

Compatible Printers

Solvent/Eco-solvent Printers

  • Roland SP-300 VersaCamm
  • Mimaki JV-3
  • Mutoh

Resin Printers

  • Roland PC 60 or 600
  • Gerber Edge
  • Fargo printers

Application Instructions

  • Print and cut design in reverse using your choice of software and printer
  • Weed excess material away from image
  • Allow 30 min-1 hour dry time for most designs before application
  • Temperature: 311 F
  • Time: 10-15 seconds
  • Pressure: Medium
  • Peel warm (wait 15 seconds, but no longer than 1 minute)
    -If you wait longer than 1 minute, press shirt again and peel warm after 15 seconds

Compatible Fabrics

  • 100% uncoated polyester
  • 100% cotton
  • All cotton/poly blends

Washing Instructions

  • Wait 24 hours before first wash
  • Turn garment inside out
  • Machine wash cold with mild detergent
  • Do not bleach or dry clean
  • Dry on low setting or hang dry

 

 

 

Share:
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request