Pressing Instructions for Aluminum One-Sided and Two-Sided Sublimation Key Chains:
- Temperature: 400F
- Time: 35-45 secs
- Pressure: Medium
- Print image in reverse
- Check for protective film before pressing
- Place in heat press with transfer on top
- Press according to above time/temperature/pressure
- After pressing, remove paper immediately.
Above instructions apply for the following keychain models:
Sublimation One-Sided Aluminum Keychain - Square - 2.25" x 2.25" | SB4600
Sublimation Key Chain - Circle - 2.5" – FRP | SB5521
Key Chain Heart - 2.5" – FRP | SB5520
Sublimation Key Chain - Rectangle - 1.25" x 3" – FRP | SB5525
Sublimation Key Chain - Football - 1.875" x 3" – FRP | SB5766
Sublimation Key Chain - Rectangle - 1.25" x 3" – Aluminum | SB4106
Sublimation Key Chain - Square - 2.25" | SB5524
Sublimation Two-Sided Key Chain - Square- 2.25" x 2.25" – Aluminum | SB4107
Sublimation Two-Sided T-Shirt Key Chain - 2.77" x 2.5" - Gloss White Metal | SB4408
Sublimation Helmet Key Chain - Two-Sided - Gloss White - 2.14" x 2.75" | SB4437
Sublimation Stein Key Chain - Two-Sided - Gloss White - 2.06" x 2.74" | SB4435
Sublimation Two-Sided Circle Key Chain - 2" Round - Gloss White Metal | SB4411
Sublimation Aluminum Two-Sided Flip-Flop Key Chain - 1.5" x 2.75" - Semi-Gloss White | SB4728
Sublimation Two-Sided Key Chain - Megaphone - 2.75" x 1.83" – FRP | SB5896
Sublimation Key Chain- Wine Glass - Two-Sided Aluminum - 1.6" x 2.7" | SB4670
Sublimation Key Chain- Awareness Ribbon - Two-Sided Aluminum - 1.6" x 2.75" | SB4660
Sublimation Key Chain- Car - Two-Sided Aluminum - 1.6" x 2.75" | SB4662
Sublimation Key Chain- Martini Glass - Two-Sided Aluminum - 2.54" x 2.75" | SB4666
Sublimation Aluminum Two-Sided Anchor Key Chain - 1.5" x 2.75" - Semi-Gloss White | SB4731
Sublimation Key Chain- Two Part Heart - Two-Sided Aluminum - 2.73" x 3.18" | SB4664
Sublimation Key Chain - Rectangle -1.6" x 2.25" – Aluminum | SB5995
Sublimation Key Chain - Oval - 2.5" x 1.375" – Aluminum | SB5917
*For pressing both sides at once:
- Print images in reverse, attach on both sides using heat tape
- Press at 400F for 45-65 seconds
- After pressing, remove paper immediately
Above instructions apply for pressing two sides at once on the following keychain models:
______________________________________________________________________________
Pressing Instructions for Polymer Two-Sided Sublimation Key Chains:
- Temperature: 350-360F
- Time: 100 - 120 secs
- Pressure: Light - Medium
- Print image in reverse
- Check for protective film before pressing
- Place in heat press with transfer on top
- Press according to above time/temperature/pressure
- After pressing, remove paper immediately.
- For best results we recommend pressing both sides.
Above instructions apply for the following keychain models:
Sublimation Polymer Two-Sided Keychain - Rectangle - 2" x 3.5" | 35001, 35001-25
Sublimation Polymer Two-Sided Keychain - Round - 1.5" | 35000, 35000-25