Fridge Magnets

  • Temperature: 400F
  • Time: 30-45 secs
  • Pressure: Medium
  1. Print image in reverse
  2. Peel protective liner from magnet if present
  3. Attach printed transfer to insert with thermal tape
  4. Place in heat press with transfer on top
  5. Press according to following time/temperature/pressure:
  6. After pressing, remove paper immediately.

Above instructions apply for the following magnet models: 

Aluminum Rectangle Sublimation Magnet - 2" x 3" | SKU SB5734
PDF Template for Adobe Photoshop | EPS Template for Corel Draw & Illustrator

Sublimation Aluminum Football Magnet - 4" x 2.75" | SKU SB4433
PDF Template for Adobe Photoshop | EPS Template for Corel Draw & Illustrator

Aluminum T-Shirt Sublimation Magnet - 2.77" x 2.5" | SKU SB4409
PDF Template for Adobe Photoshop | EPS Template for Corel Draw & Illustrator

Plastic Circle Sublimation Magnet - 2.5" | SKU SB5522
PDF Template for Adobe Photoshop | EPS Template for Corel Draw & Illustrator

Plastic Square Sublimation Magnet - 2.25" | SKU SB5523
PDF Template for Adobe Photoshop | EPS Template for Corel Draw & Illustrator

Plastic Heart Sublimation Magnet - 2.5" | SKU SB5527
PDF Template for Adobe Photoshop | EPS Template for Corel Draw & Illustrator

Hardboard Sublimation Square Magnet - 2.25" | SKU SB4051
PDF Template for Adobe Photoshop | EPS Template for Corel Draw & Illustrator

Hardboard Sublimation Rectangle Magnet - 2" x 3" | SKU SB4052
PDF Template for Adobe Photoshop | EPS Template for Corel Draw & Illustrator

Aluminum Sublimation Magnet - Stein - 2.06" x 2.74" | SKU SB4535
PDF Template for Adobe Photoshop | EPS Template for Corel Draw & Illustrator

Aluminum Sublimation Magnet - Awareness Ribbon - 1.6" x 2.75" | SKU SB4659
PDF Template for Adobe Photoshop | EPS Template for Corel Draw & Illustrator

Aluminum Sublimation Magnet - Motor Car - 1.6" x 2.75" | SKU SB4661
PDF Template for Adobe Photoshop | EPS Template for Corel Draw & Illustrator

Aluminum Sublimation Magnet - Shamrock -2.25" x 2.26" | SKU SB4667
PDF Template for Adobe Photoshop | EPS Template for Corel Draw & Illustrator

Aluminum Sublimation Magnet - Martini Glass - 2.54" x 2.75" | SKU SB4665
PDF Template for Adobe Photoshop | EPS Template for Corel Draw & Illustrator

Aluminum Sublimation Magnet - Wine Glass - 1.6" x 2.7" | SKU SB4669
PDF Template for Adobe Photoshop | EPS Template for Corel Draw & Illustrator

Aluminum Sublimation Magnet - Two-Part Heart - 2.73" x 3.18" | SKU SB4663
PDF Template for Adobe Photoshop | EPS Template for Corel Draw & Illustrator

________________________________________________________________________________________________________________________

  • Temperature: 400F
  • Time: 160 - 200 secs
  • Pressure: Medium
  1. Print image in reverse
  2. Peel protective liner from magnet if present
  3. Attach printed transfer to insert with thermal tape
  4. Place in heat press with transfer on bottom
  5. Press according to following time/temperature/pressure:
  6. After pressing, remove paper immediately.

Above instructions apply for the following magnet models: 

Ceramic Rectangle Sublimation Magnet - 2" x 2.75" | SKU  84005
PDF Template for Adobe Photoshop | EPS Template for Corel Draw & Illustrator

 

 

 

 

 

 

 

 

Share:
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request