MDF Board Award Photo Plaques by Unisub

Pressing Instructions for Sublimation MDF Hardboard Photo Plaques by Unisub

• Temperature: 385F
• Time: 120-180 seconds
• Pressure: Medium

1. Print image in reverse
2. Check for protective film prior to pressing
3. Place in heat press with transfer on top
4. Press according to above time/temperature/pressure
5. After pressing, remove paper immediately.

Above instructions apply for the following MDF hardboard plaque and award models:

Black Edge Sublimation Plaque - 5" x 7" | SKU SB5669

Black Edge Sublimation Plaque - 6" x 8" | SKU SB1001

Black Ogee Edge Sublimation Plaque - 5" x 7" | SKU SB4592

Black Edge Sublimation Plaque - 7" x 9" | SKU SB1002

Black Ogee Edge Sublimation Plaque - 6" x 8" | SKU SB4593

Black Ogee Edge Sublimation Plaque - 6" x 8" | SB4594

Black Edge Plaque - 8" x 10" | SKU SB1003

Black Ogee Edge Sublimation Plaque - 8" x 10" | SKU SB4595

Black Ogee Edge Sublimation Plaque - 9" x 12" | SKU SB4596

Black Edge Sublimation Plaque - 9" x 12" | SKU SB1004

Cherry Edge Sublimation Plaque - 5" x 7" | SKU SB5670

Cherry Edge SublimationPlaque - 6" x 8" | SKU SB1005

Cherry Edge Sublimation Plaque - 7" x 9" | SKU SB1006

Cherry Edge Sublimation Plaque - 8" x 10" | SKU SB1007

Cherry Edge Sublimation Plaque - 9" x 12" | SKU SB1008

Round Sublimation Award Plaque - 8.125" | SKU SB5765

Star Sublimation Award Plaque - 5" | SKU SB5893-G

Small Shield Sublimation Award Plaque - 5" x 6" | SKU SB5745-C

Large Shield Sublimation Award Plaque - 7" x 9" | SKU SB5616-C

Small Home Plate Award Plaque - 6" x 6" | SKU SB5679-C

Large Home Plate Award Plaque - 10" x 10" | SKU SB5680-G

Football Sublimation Award Plaque - 10" x 10" | SKU SB5757-G

Cross Plaque w/ Oval Sublimation Hardboard Tile - 7" x 11" | SKU SB5783

Oval Sublimation Hardboard Tile - 4.2" x 5.9" | SKU SB5726

Oversized Plaque w/ Clock Kit - 11.625" x 16" | SKU SB5581

Oversized Plaque w/ Black Edge -11.625" x 16" | SKU SB5584

Black Edge Sublimation Plaque w/ Flat Profile - 8" x 10" | SKU SB5664

 Small Round Award Plaque - 4.25" | SKU SB5810-G

Large Round Award Plaque - 5.75" | SKU SB5811-G

Rectangle Sublimation Award Plaque - 4" x 5.75" | SKU SB5813-G

Peak Sublimation Award Plaque - 4" x 5.75" | SKU SB5814-G

Krystal Sublimation Award Plaque - 3.8" x 5.75" | SKU SB5815-G

Cross Sublimation Award Plaque - 6.875" x 5.25" | SKU SB5827-G

_______________________________________________________________________________________

• Temperature: 385F
• Time: 45 seconds
• Pressure: Medium

1. Print image in reverse
2. Check for protective film prior to pressing
3. Place in heat press with transfer on bottom
4. Press according to above time/temperature/pressure
5. After pressing, remove paper immediately.

Above instructions apply for the following MDF hardboard plaque and award models:

Aluminum DynaSub Sublimation Plaque - 5" x 7" w/ Square Corners | SKU D5X7