Flasks

Pressing Instructions for Sublimation Flasks with Flask Wrap:

  • Temperature: 400F
  • Time: 9-10 Minutes
  1. Print image in reverse
  2. Remove lid of flask prior to pressing
  3. Cover with heat pad
  4. Wrap flask wrap around the outside and secure clasp
  5. Place in pre-heated convection oven
  6. Press according to above time/temperature/pressure
  7. After oven time elapses, remove wrap and paper immediately.
  8. Cool in water immediately.

*If testing for the first time, try 9 minutes at first and see if time needs to be extended for a more vibrant transfer. If the transfer is blurry/browned, reduce time.

Pressing Instructions for Sublimation Flasks with Cap Heat Press:

  • Temperature: 400F
  • Time: 45 seconds
  • Pressure: Firm
  1. Print image in reverse
  2. Attach transfer to flask using thermal tape
  3. Remove lid of flask prior to pressing
  4. Position in heat press transfer on top
  5. Press according to above time/temperature/pressure
  6. After pressing, remove paper immediately.
  7. Allow the flask to cool completely before reattaching lid and placing in packaging

*Please note, not every cap heat press platen will be curved exactly with the flask shape. We recommend you buy one flask initially to test with.

Above instructions apply for the following flask models:

Stainless Steel Sublimation Flask - 8 oz. | 23527
PDF Template for Adobe Photoshop | EPS Template for Corel Draw & Illustrator

 

Share:
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request