SKU CPPU | CPPUM
Core size
- 3"
Application Instructions
- Print image onto media using your choice of software and printer
-Do not print in reverse - Allow drying for 30 minutes - 1 hour before contour cutting
-Heater/Dryer settings: 113F/45C-122F/50C - Weed away excess material
- Mask design with TTD High Tack Mask
- Temperature: 295 F
- Time: 15-20 seconds
- Pressure: Medium
- Peel liner immediately
- For best performance, after peeling mask liner, recover with silicone and press for additional 2-3 seconds
Compatible Fabrics
- 100% polyester
- 100% cotton
- All cotton/poly blends
- Lycra/spandex
Washing Instructions
- Wait 24 hours before first wash
- Machine wash warm/mild detergent
- Dry at normal setting only
- Do not dry clean
- Do not use bleach
- Iron friendly!