Drink Coasters

Pressing Instructions for Sublimation Drink Coasters:

  • Temperature: 400F
  • Time: 30-45 secs
  • Pressure: Medium
  1. Print image in reverse
  2. Check for protective film before pressing
  3. Place in heat press with transfer on top
  4. Press according to above time/temperature/pressure
  5. After pressing, remove paper immediately.

Above instructions apply for the following drink coaster models:

Sublimation MDF Coaster w/ Cork Back - 4" x 4" | 84004

Sublimation MDF Square Coaster w/ rounded edges and Cork Back - 3.54" x 3.54" | SB4026

Hardboard Circle Sublimation Coaster - 3.54" Round - Gloss White | SB4028

Hardboard Square Coaster with Rounded Corners - 3.54" x 3.54" - Semi-Gloss White | SB4597

White Sublimation Fabric Top Coaster - 4" x 4" - 1/4" Thick - Black Rubber Back | C4040 1/4

White Sublimation Fabric Top Coaster - 4" x 4" - 1/8" Thick - Black Rubber Back | C4040

White Sublimation Fabric Top Coaster - 3.5" Round - 1/4" Thick - Black Rubber Back | C35 ROUND

White Sublimation Fabric Coaster - 3.5" x 3.5" - 1/4" Thick - Black Rubber Back | C3535 1/4

Sublimation Hardboard Pumpkin Coaster | SB4430

Sublimation Hardboard Football Coaster | SB4431

Sublimation Hardboard Coaster 4" x 4" | SB1009

Sublimation Hardboard Coaster w/ Cork Back - 3.75" x 3.75" | SB5677

Round Sublimation Hardboard Cork-Backed Coaster - 3.75" | SB5822

Sublimation Coaster - FRP -3 5/8" round | SB5703

Sublimation Heart-Shaped Coaster - Hardboard with cork back - 3.8" x 4" | SB4015

Mahogany wooden coaster with Sublimation FRP insert - 4.375" | SB5685

Coaster Puzzle - 7.625" Sublimation Square | SB5795

Mahogany Wooden Coaster with Sublimation FRP inserts - 4.375" | SB5805

 

 

 

 

 

Share:
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request