Pet Bandanas

Pressing Instructions for Pet Bandana:

  • Temperature: 385F
  • Time: 30 secs
  • Pressure: Medium
  1. Print image in reverse.
  2. Attach printed transfer to bandana with spray adhesive or tape.
  3. Place in heat press with transfer on top, facing down. 
  4. Press at 385F° for 30 seconds, using medium pressure. 
  5. After pressing, remove the sublimation paper immediately.

Above instructions apply for the following pet bandana models: 

Vapor Sublimation White Bandana - 19.5" x 19.5" | SKU BANS100

Vapor Sublimation White Pet Bandana - 28" x 20" x 20" | SKU DOGBAN


Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request