Glitter Flake Heat Transfer Vinyl

SKU GL20P

                    

Pressing Instructions:

  1. Cut design in reverse and weed away outside vinyl material, leaving only your transfer on the clear liner.
    Due to the texture and thickness of Glitter Flake, we do not recommend cutting details (ie: single pieces/elements) smaller than 0.25".
  2. Preheat garment at 320F for about 2-3 seconds.
  3. Press vinyl transfer to the garment at 320F for 10-15 seconds using firm pressure.
  4. Peel the clear liner away while the transfer is HOT.

Compatible Fabrics

  • 100% Cotton
  • 100% Polyester
  • Cotton/Polyester blends
  • Leather
  • Lycra/Spandex *
    * Will adhere to fabric, but may crack when stretched.
  • Actual Roll Width: 19.6" wide

Washing/Aftercare Instructions:

  • Do not dry clean
  • Machine wash WARM with a mild detergent, inside-out
  • Dry at normal setting
  • No chlorine bleach
  • Wait 24 hours before first wash

 

Share:
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request